Hubsan Zino 2 LEAS 2.0 Drone w/ 4K 3-axis  1
, ,

Hubsan Zino 2 LEAS 2.0 Drone w/ 4K 3-axis



Hubsan Zino 2 LEAS 2.0 GPS 8KM 5G WiFi FPV with 4K 60fps UHD Camera 3-axis Gimbal RC Drone Quadcopter RTF

Enjoy Your Flight Right Now!
The remote control distance of Hubsan Zino 2 has been upgraded from 2.5km to 8km, which allowing you to take photos of further scenery and places. The camera is upgraded from 4k-30fps to 4k-60fps, and the images taken are more clear and exquisite. Larger lens size for better low-light effect. In addition, it also has a remote control with digital display which has a high brightness scree to allow you to track the flight data in real time and you can clearly see it under the strong light outdoors, so as to better enhance the user experience. The flight endurance of Hubsan Zino 2 can max. up to 33 minutes (in a windless environment), so that you to fully enjoy your flight in one go.


Hubsan ZINO 2Size32.60 x 26.00 x 9.49 cm
 Weight (including battery and gimbal)700g
 Maximum Take-off Altitude5000m
 Max Flying Time33mins (windless)
 Max Hovering Time32mins (windless)
 Max. Endurance Mileage20km (50km/h windless cruising)
 Wind Resistance5-level
 Max. Tiltable Angle25 degrees (normal mode);
35 degrees (sports mode)
 Max. Rotational Speed150 degrees/s
 Max SpeedMovie mode: 1m/s
Normal mode: 12m/s
Sport mode: 20m/s
 Max Ascent SpeedNormal mode: 3m/s
Sport mode: 5m/s
 Max Descent SpeedNormal mode: 2m/s
Sport mode: 3m/s
 Working Temperature-10 Deg.C – 40 Deg.C
 Working Frequency5.725 – 5.850 GHz
 PositioningGPS + GLONASS
CameraImage Sensor1/2.3 inch CMOS sensor
 View Angle80°
 Equivalent Focal Length24-48mm
 ISO RangePhotography: 100-1600 (automatic); 100-3200 (manual)
Video: 100-3200 (automatic); 100-3200 (manual)
 Shutter Speed1/8000 – 1/30
 Image Pixel12MP
 Compress Resolution4K: 3840*2160 30/60fps /
2.7K: 2704*1520 30/60fps /
1080P: 1920*1080 30/60/120fps /
720P: 1280*720 30/60/120/200fps
 Video Maximum Bitrate100Mbps
 Support File SystemFAT32
 Image FormatJPEG/DNG (RAW)
 Video FormatMP4 / MOV (h.264 / mpeg-4 AVC)
GimbalStructural Design RangePitch: -135 degrees to 45 degrees;
Roll: -40degrees to 40 degrees;
Shift: -35 degrees to 35 degrees
 Controllable Rotation RangePitch -90 degrees to 0 degrees
 Stability System3-axis gimbal
 Maximum Control Speed (Pitch)100°/s
 Angle jitter±0.01°
Image TransmissionSchemeLEAS 2.0
 Transmission power (EIRP)<=26dbm
 Band5.725-5.850 GHz
BatteryCapacity3800 mAh
 Nominal Voltage17.4V (4S)
 Charging Limit Voltage17.6V
 Battery Typeintelligent lithium battery, accurate calculation of battery power,
ensure the safety of battery life
 Weight310 g
 Charging Environment Temperature-10 Deg.C- 40 Deg.C
 Maximum Charging Power52.2W
ChargerInput Voltage100V-240V
 Input Current2A
 Output Voltage17.1V-18.9V
 Output Current0.0- 3.33A
 Rated Output Power54W
Remote ControlOperating Frequency5.725-5.850 GHz
 Maximum Effective Signal Distance8KM (No interference, No obstacle)
 Operating Environment Temperature-10 Deg.C- 40 Deg.C
 Built-In Battery3350mAh
 ModeMode 2 (Left Hand Throttle)
 Working Current/Voltage3.7V, 1400mA (connecting the android devices);
750mA 3.7V (connecting the iOS devices)
 Support Mobile Device SizeMaximum Length: 160mm;
Thickness: 6.5 – 8.5mm
 Interfaces TypeLigh&tning / Micro USB / Type-C
 ChargingMicro USB

– 8KM upgraded remote control distance, the image transmission distance is even more distant
– 4K-60fps camera, support RAW format, photo lossless output and time-lapse shooting
– 1/2.3 inch CMOS larger lens size, better low light effect
– Remote controller with digital display, visible in strong lights
– The flight endurance up to 33 minutes (windless); Accurate battery power monitoring
– Update the latest firmware of aircraft and remote control online through App
– Negative film are downloaded directly via a wireless link
– The gimbal is detachable
– Support using the transmitter to control the drone DIRECTLY

Package Included:
1 x ZINO 2 RC Drone
1 x Remote Control
2 x Blade
2 x Blade Screw
1 x Charger
1 x Screwdriver
1 x Remote Control USB Charging Cable
1 x Battery
1 x English Manual

Q: Where can I find the updated tutorial video of Hubsan ZINO 2?


Q: What is the purpose of the change log (for drones)?

A: 1.Improved the image and video transmission quality

2.Optimize online upgrade

3.Add the function that you can record video in line fly mode

Q: How to solve the issue that the forced online upgrade is stuck

and the upgrade is not completed?

A:1.Update the APP Version Android V1.1.3 and IOS V1.1.6

2.After installing the APP, open the remote control and connect to the APP and click to update the firmware of the remote control when connected (the aircraft does not need to be turned on).

3.After the remote controller update is completed, turn on the aircraft to connect to the remote controller and update the aircraft firmware again (to ensure that the remote controller is fully charged)

4.If the remote control cannot be connected to the aircraft, you need to determine the status of the indicator light next to the SD card of the aircraft. Normally, the light is yellow (that is the green light and the red light are always on at the same time).

Q: What should I do if the indicator is abnormal?

A: Please refer to the following for troubleshooting status

The IT firmware upgrade led light status: the upgrade red light flashes quickly, and finally turns solid (Red light and green light is always on at the same time means yellow light)

IT firmware upgrade failed indicator (red light status):

1. The red light is off: you need to re-burn through the USB cable (refer to Zino2 firmware package upgrade instructions on the official website,);

2.The red light slow flashing: the image is faulty and needs

inspection and maintenance

The PW firmware upgrade light status: the upgrade green light flashes quickly and then slowly flashes and turns off, and then turns on (the red light and green light are always on at the same time means the yellow light).

Upgrade completion status: The green light is solid and turns to yellow light solid. The green light will turn off after a period of time and then light up again. The interface will show that it is

not connected to the aircraft, just wait for the aircraft to reconnect automatically.

Upgrade failed PW indicator (green light status):

The green light keeps flashing slowly: Turn off the aircraft,

Using the computer to create a folder in the root directory of the SD card, named repeatorfw and then copy the upgrade file under the ZINO2-PW file to this “repeatorfw” folder. After inserting the SD card into the aircraft, turn it on and wait for about three to four minutes to finish the upgrade(the green light will be on, and then turn to the yellow light solid.)

The green light is off (requires a tool to update the PW firmware): copy the upgrade file to the SD card as above, insert the SD card into the aircraft, Using a needle-like object to long

press the binding key and power on the drone at the same time, and then release the binding key after booting, the aircraft enters the upgrade Mode (green light flashes), the green light is off after the upgrade is completed.

Q: How to upgrade SD card?

A: The following is the SD card upgrade instructions

Using the computer to create a folder in the root directory of the SD card, named repeatorfw and Copy the PW firmware into the SD card and then put it the drone, Finally it will do automatically upgrade after turning on;

Upgrade status: green light indicator next to the SD card slot;

The green light flashes quickly after about 15 seconds of booting: the PW firmware is being upgraded; (Note: the power cannot be cut off during the upgrade!)

Green light flashes slowly: data is being read and written

Green light is off: waiting for restart

Solid green or yellow: The PW firmware upgrade is complete


Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.